How to replace a CV boot with the over-the-joint method

“How to replace a CV boot with the over-the-joint method” with video from Youtube

Video “How to replace a CV boot with the over-the-joint method”

How to easily replace a CV boot without dismantling the joint, using a cone tool and an universal CV boot. All stages step by step.

This video does not constitute or replace a real specialized technical manual, and was only made ​​for convenience and educational purposes. “TutoBuild Eng” makes no warranties of any kind and accepts no liability. “TutoBuild Eng” cannot be held responsible for any damage caused to devices or persons using information contained in this video. The use of the information contained in this video is at your own risk.

What else to read

If you like video and this material about “How to replace a CV boot with the over-the-joint method”, please visit our category NCT car prepare, where we help to explain how to prepare your car for NCT examination.

Please if you have any questions or comments you can leave them in the section on the bottom of the page.

0/5 (0 Reviews)


  1. I can see a phucks being thrown around doing this job.!!!

  2. All that trouble might as well just replace the entire drive shaft

  3. Es más rápido quitar el eje que hacer ese desmadre,

  4. Cut new CV boot, put in place, superglue it back together. 5 minutes.

  5. Ich hätte vorher die Manschette mit dem Heissluftföhn aufgeweischt !

  6. Man that is a lot of stretching….I bet the new boot doesnt last long after being stretched over that cone.

  7. Much easier if you remove front shaft then the tripod and install the boot .

  8. He’s heavy breathing because lady “robot voice” won’t let go of his xxxxx until the job is finished! She’s got a tight grip!!!

  9. робота шопопало кошмар

Leave a Reply